LTCFrameMBS.BinaryGroupFlagBit0 as Integer

Type	Topic	Plugin	Version	macOS	Windows	Linux	iOS	Targets
property	Timecode	MBS Tools Plugin	20.1	✅ Yes	✅ Yes	✅ Yes	✅ Yes	All

indicate user-data char encoding, see table above - bit 43.

1 bit value, so only 0 or 1.
(Read and Write property)

LTCFrameMBS.BinaryGroupFlagBit1 as Integer

Type	Topic	Plugin	Version	macOS	Windows	Linux	iOS	Targets
property	Timecode	MBS Tools Plugin	20.1	✅ Yes	✅ Yes	✅ Yes	✅ Yes	All

indicate timecode is local time wall-clock, see table above - bit 58.

1 bit value, so only 0 or 1.
(Read and Write property)

LTCFrameMBS.BinaryGroupFlagBit2 as Integer

Type	Topic	Plugin	Version	macOS	Windows	Linux	iOS	Targets
property	Timecode	MBS Tools Plugin	20.1	✅ Yes	✅ Yes	✅ Yes	✅ Yes	All

indicate user-data char encoding (or parity with 25fps), see table above - bit 59.

1 bit value, so only 0 or 1.
(Read and Write property)

LTCFrameMBS.BiphaseMarkPhaseCorrection as Integer

Type	Topic	Plugin	Version	macOS	Windows	Linux	iOS	Targets
property	Timecode	MBS Tools Plugin	20.1	✅ Yes	✅ Yes	✅ Yes	✅ Yes	All

The Bi-Phase Mark Phase Correction Bit.

The Bi-Phase Mark Phase Correction Bit (Bit 27 or 59) may be set or cleared so that that every 80-bit word contains an even number of zeroes. This means that the phase of the pulse train in every Sync Word will be the same.
(Read and Write property)

LTCFrameMBS.ColFrame as Integer

Type	Topic	Plugin	Version	macOS	Windows	Linux	iOS	Targets
property	Timecode	MBS Tools Plugin	20.1	✅ Yes	✅ Yes	✅ Yes	✅ Yes	All

Colour-frame: timecode intentionally synchronized to a colour TV field sequence

1 bit value, so only 0 or 1.
(Read and Write property)

LTCFrameMBS.Data as MemoryBlock

Type	Topic	Plugin	Version	macOS	Windows	Linux	iOS	Targets
property	Timecode	MBS Tools Plugin	20.1	✅ Yes	✅ Yes	✅ Yes	✅ Yes	All

The raw frame data as memoryblock.

When setting you can either pass 368 or 364 bytes (LTCFrameExt) or 10 bytes (LTCFrame)
(Read and Write property)

LTCFrameMBS.DFBit as Integer

Type	Topic	Plugin	Version	macOS	Windows	Linux	iOS	Targets
property	Timecode	MBS Tools Plugin	20.1	✅ Yes	✅ Yes	✅ Yes	✅ Yes	All

indicated drop-frame timecode.

1 bit value, so only 0 or 1.
(Read and Write property)

LTCFrameMBS.Frames as Integer

Type	Topic	Plugin	Version	macOS	Windows	Linux	iOS	Targets
property	Timecode	MBS Tools Plugin	20.1	✅ Yes	✅ Yes	✅ Yes	✅ Yes	All

Get or set frames field.

Computed by the MBS Plugin for you as a convenience from both frames_tens and frames_unit.
(Read and Write property)

LTCFrameMBS.FrameTens as Integer

Type	Topic	Plugin	Version	macOS	Windows	Linux	iOS	Targets
property	Timecode	MBS Tools Plugin	20.1	✅ Yes	✅ Yes	✅ Yes	✅ Yes	All

SMPTE framenumber BCD tens 0..3.

(Read and Write property)

LTCFrameMBS.FrameUnits as Integer

Type	Topic	Plugin	Version	macOS	Windows	Linux	iOS	Targets
property	Timecode	MBS Tools Plugin	20.1	✅ Yes	✅ Yes	✅ Yes	✅ Yes	All

SMPTE framenumber BCD unit 0..9.

(Read and Write property)

LTCFrameMBS.Hours as Integer

Type	Topic	Plugin	Version	macOS	Windows	Linux	iOS	Targets
property	Timecode	MBS Tools Plugin	20.1	✅ Yes	✅ Yes	✅ Yes	✅ Yes	All

Get or set hours field.

Computed by the MBS Plugin for you as a convenience from both hours_tens and hours_unit.
(Read and Write property)

LTCFrameMBS.HoursTens as Integer

Type	Topic	Plugin	Version	macOS	Windows	Linux	iOS	Targets
property	Timecode	MBS Tools Plugin	20.1	✅ Yes	✅ Yes	✅ Yes	✅ Yes	All

SMPTE hours BCD tens 0..2.

(Read and Write property)

LTCFrameMBS.HoursUnits as Integer

Type	Topic	Plugin	Version	macOS	Windows	Linux	iOS	Targets
property	Timecode	MBS Tools Plugin	20.1	✅ Yes	✅ Yes	✅ Yes	✅ Yes	All

SMPTE hours BCD unit 0..9.

(Read and Write property)

LTCFrameMBS.Mins as Integer

Type	Topic	Plugin	Version	macOS	Windows	Linux	iOS	Targets
property	Timecode	MBS Tools Plugin	20.1	✅ Yes	✅ Yes	✅ Yes	✅ Yes	All

Get or set minutes field.

Computed by the MBS Plugin for you as a convenience from both minutes_tens and minutes_unit.
(Read and Write property)

LTCFrameMBS.MinsTens as Integer

Type	Topic	Plugin	Version	macOS	Windows	Linux	iOS	Targets
property	Timecode	MBS Tools Plugin	20.1	✅ Yes	✅ Yes	✅ Yes	✅ Yes	All

SMPTE minutes BCD tens 0..6.

(Read and Write property)

LTCFrameMBS.MinsUnits as Integer

Type	Topic	Plugin	Version	macOS	Windows	Linux	iOS	Targets
property	Timecode	MBS Tools Plugin	20.1	✅ Yes	✅ Yes	✅ Yes	✅ Yes	All

SMPTE minutes BCD unit 0..9.

(Read and Write property)

LTCFrameMBS.Secs as Integer

Type	Topic	Plugin	Version	macOS	Windows	Linux	iOS	Targets
property	Timecode	MBS Tools Plugin	20.1	✅ Yes	✅ Yes	✅ Yes	✅ Yes	All

Get or set seconds field.

Computed by the MBS Plugin for you as a convenience from both seconds_tens and seconds_unit.
(Read and Write property)

LTCFrameMBS.SecsTens as Integer

Type	Topic	Plugin	Version	macOS	Windows	Linux	iOS	Targets
property	Timecode	MBS Tools Plugin	20.1	✅ Yes	✅ Yes	✅ Yes	✅ Yes	All

SMPTE seconds BCD tens 0..6

(Read and Write property)

LTCFrameMBS.SecsUnits as Integer

Type	Topic	Plugin	Version	macOS	Windows	Linux	iOS	Targets
property	Timecode	MBS Tools Plugin	20.1	✅ Yes	✅ Yes	✅ Yes	✅ Yes	All

SMPTE seconds BCD unit 0..9

(Read and Write property)

LTCFrameMBS.SyncWord as Integer

Type	Topic	Plugin	Version	macOS	Windows	Linux	iOS	Targets
property	Timecode	MBS Tools Plugin	20.1	✅ Yes	✅ Yes	✅ Yes	✅ Yes	All

The sync word file.

(Read and Write property)

LTCFrameMBS.TimeCode as LTCSMPTETimecodeMBS

Type	Topic	Plugin	Version	macOS	Windows	Linux	iOS	Targets
property	Timecode	MBS Tools Plugin	20.1	✅ Yes	✅ Yes	✅ Yes	✅ Yes	All

Convert binary LTCFrame into a SMPTETimecode.

(Read only property)

LTCFrameMBS.User1 as Integer

Type	Topic	Plugin	Version	macOS	Windows	Linux	iOS	Targets
property	Timecode	MBS Tools Plugin	20.1	✅ Yes	✅ Yes	✅ Yes	✅ Yes	All

User defined bits.

You can set them as you like, but be aware you only have 4 bits here (value 0 to 15).
Usually set as a block of 32-bit using UserBits property in encoder.
(Read and Write property)

LTCFrameMBS.User2 as Integer

Type	Topic	Plugin	Version	macOS	Windows	Linux	iOS	Targets
property	Timecode	MBS Tools Plugin	20.1	✅ Yes	✅ Yes	✅ Yes	✅ Yes	All

User defined bits.

You can set them as you like, but be aware you only have 4 bits here (value 0 to 15).
Usually set as a block of 32-bit using UserBits property in encoder.
(Read and Write property)

LTCFrameMBS.User3 as Integer

Type	Topic	Plugin	Version	macOS	Windows	Linux	iOS	Targets
property	Timecode	MBS Tools Plugin	20.1	✅ Yes	✅ Yes	✅ Yes	✅ Yes	All

User defined bits.

You can set them as you like, but be aware you only have 4 bits here (value 0 to 15).
Usually set as a block of 32-bit using UserBits property in encoder.
(Read and Write property)

LTCFrameMBS.User4 as Integer

Type	Topic	Plugin	Version	macOS	Windows	Linux	iOS	Targets
property	Timecode	MBS Tools Plugin	20.1	✅ Yes	✅ Yes	✅ Yes	✅ Yes	All

User defined bits.

You can set them as you like, but be aware you only have 4 bits here (value 0 to 15).
Usually set as a block of 32-bit using UserBits property in encoder.
(Read and Write property)

LTCFrameMBS.User5 as Integer

Type	Topic	Plugin	Version	macOS	Windows	Linux	iOS	Targets
property	Timecode	MBS Tools Plugin	20.1	✅ Yes	✅ Yes	✅ Yes	✅ Yes	All

User defined bits.

You can set them as you like, but be aware you only have 4 bits here (value 0 to 15).
Usually set as a block of 32-bit using UserBits property in encoder.
(Read and Write property)

LTCFrameMBS.User6 as Integer

Type	Topic	Plugin	Version	macOS	Windows	Linux	iOS	Targets
property	Timecode	MBS Tools Plugin	20.1	✅ Yes	✅ Yes	✅ Yes	✅ Yes	All

User defined bits.

You can set them as you like, but be aware you only have 4 bits here (value 0 to 15).
Usually set as a block of 32-bit using UserBits property in encoder.
(Read and Write property)

LTCFrameMBS.User7 as Integer

Type	Topic	Plugin	Version	macOS	Windows	Linux	iOS	Targets
property	Timecode	MBS Tools Plugin	20.1	✅ Yes	✅ Yes	✅ Yes	✅ Yes	All

User defined bits.

You can set them as you like, but be aware you only have 4 bits here (value 0 to 15).
Usually set as a block of 32-bit using UserBits property in encoder.
(Read and Write property)

LTCFrameMBS.User8 as Integer

Type	Topic	Plugin	Version	macOS	Windows	Linux	iOS	Targets
property	Timecode	MBS Tools Plugin	20.1	✅ Yes	✅ Yes	✅ Yes	✅ Yes	All

User defined bits.

You can set them as you like, but be aware you only have 4 bits here (value 0 to 15).
Usually set as a block of 32-bit using UserBits property in encoder.
(Read and Write property)

LTCFrameMBS.UserBits as UInt32

Type	Topic	Plugin	Version	macOS	Windows	Linux	iOS	Targets
property	Timecode	MBS Tools Plugin	20.1	✅ Yes	✅ Yes	✅ Yes	✅ Yes	All

Queries all user bits as one 32-bit value.

(Read only property)