Platforms to show: All Mac Windows Linux Cross-Platform
Back to SmartCardMBS class.
SmartCardMBS.kAttributeIccTypePerAtr = 590596
Type | Topic | Plugin | Version |
const | SmartCard | MBS Tools Plugin | 16.3 |
Single byte indicating smart card type.
0 = unknown type
1 = 7816 Asynchronous
2 = 7816 Synchronous
Other values RFU.
SmartCardMBS.kAttributeMaxClk = 196898
Type | Topic | Plugin | Version |
const | SmartCard | MBS Tools Plugin | 16.3 |
Maximum clock rate, in kHz.
SmartCardMBS.kAttributeMaxDataRate = 196900
Type | Topic | Plugin | Version |
const | SmartCard | MBS Tools Plugin | 16.3 |
Maximum data rate, in bps.
SmartCardMBS.kAttributeMaxIfsd = 196901
Type | Topic | Plugin | Version |
const | SmartCard | MBS Tools Plugin | 16.3 |
Maximum bytes for information file size device.
SmartCardMBS.kAttributeMaxinput = 499719
Type | Topic | Plugin | Version |
const | SmartCard | MBS Tools Plugin | 16.3 |
Maximum input
SmartCardMBS.kAttributePowerMgmtSupport = 262449
Type | Topic | Plugin | Version |
const | SmartCard | MBS Tools Plugin | 16.3 |
Zero if device does not support power down while smart card is inserted. Nonzero otherwise.
SmartCardMBS.kAttributeProtocolTypes = 196896
Type | Topic | Plugin | Version |
const | SmartCard | MBS Tools Plugin | 16.3 |
Integer encoded as 0x0rrrpppp where rrr is RFU and should be 0x000.
pppp encodes the supported protocol types. A '1' in a given bit position indicates support for the associated ISO protocol, so if bits zero and one are set, both T=0 and T=1 protocols are supported.
SmartCardMBS.kAttributeSupressT1IfsRequest = 2147418119
Type | Topic | Plugin | Version |
const | SmartCard | MBS Tools Plugin | 16.3 |
Supress T1 information file size request.
SmartCardMBS.kAttributeUserAuthInputDevice = 328002
Type | Topic | Plugin | Version |
const | SmartCard | MBS Tools Plugin | 16.3 |
User authentication input device.
SmartCardMBS.kAttributeUserToCardAuthDevice = 328000
Type | Topic | Plugin | Version |
const | SmartCard | MBS Tools Plugin | 16.3 |
User to card authentication device
SmartCardMBS.kAttributeVendorIfdSerialNo = 65795
Type | Topic | Plugin | Version |
const | SmartCard | MBS Tools Plugin | 16.3 |
Vendor-supplied interface device serial number.
SmartCardMBS.kAttributeVendorIfdType = 65793
Type | Topic | Plugin | Version |
const | SmartCard | MBS Tools Plugin | 16.3 |
Vendor-supplied interface device type (model designation of reader).
SmartCardMBS.kAttributeVendorIfdVersion = 65794
Type | Topic | Plugin | Version |
const | SmartCard | MBS Tools Plugin | 16.3 |
Vendor-supplied interface device version (DWORD in the form 0xMMmmbbbb where MM = major version, mm = minor version, and bbbb = build number).
SmartCardMBS.kAttributeVendorName = 65792
Type | Topic | Plugin | Version |
const | SmartCard | MBS Tools Plugin | 16.3 |
Vendor name.
SmartCardMBS.kCardStateAbsent = 2
Type | Topic | Plugin | Version |
const | SmartCard | MBS Tools Plugin | 16.3 |
There is no card in the reader.
SmartCardMBS.kCardStateNegotiable = 32
Type | Topic | Plugin | Version |
const | SmartCard | MBS Tools Plugin | 16.3 |
The card has been reset and is awaiting PTS negotiation.
SmartCardMBS.kCardStatePowered = 16
Type | Topic | Plugin | Version |
const | SmartCard | MBS Tools Plugin | 16.3 |
Power is being provided to the card, but the reader driver is unaware of the mode of the card.
SmartCardMBS.kCardStatePresent = 4
Type | Topic | Plugin | Version |
const | SmartCard | MBS Tools Plugin | 16.3 |
There is a card in the reader, but it has not been moved into position for use.
SmartCardMBS.kCardStateSpecific = 64
Type | Topic | Plugin | Version |
const | SmartCard | MBS Tools Plugin | 16.3 |
The card has been reset and specific communication protocols have been established.
SmartCardMBS.kCardStateSwallowed = 8
Type | Topic | Plugin | Version |
const | SmartCard | MBS Tools Plugin | 16.3 |
There is a card in the reader in position for use. The card is not powered.
SmartCardMBS.kCardStateUnknown = 1
Type | Topic | Plugin | Version |
const | SmartCard | MBS Tools Plugin | 16.3 |
Unknown state.
Type | Topic | Plugin | Version |
const | SmartCard | MBS Tools Plugin | 16.3 |
Eject card.
Type | Topic | Plugin | Version |
const | SmartCard | MBS Tools Plugin | 16.3 |
Do not do anything special on reconnect.
Type | Topic | Plugin | Version |
const | SmartCard | MBS Tools Plugin | 16.3 |
Any protocol is welcome
Type | Topic | Plugin | Version |
const | SmartCard | MBS Tools Plugin | 16.3 |
Raw protocol
Type | Topic | Plugin | Version |
const | SmartCard | MBS Tools Plugin | 16.3 |
T=0 is the active protocol.
Type | Topic | Plugin | Version |
const | SmartCard | MBS Tools Plugin | 16.3 |
T=1 is the active protocol.
Type | Topic | Plugin | Version |
const | SmartCard | MBS Tools Plugin | 16.3 |
T=15 protocol (not on Windows)
SmartCardMBS.kProtocolUndefined = 0
Type | Topic | Plugin | Version |
const | SmartCard | MBS Tools Plugin | 16.3 |
kShareDirect has been specified, so that no protocol negotiation has occurred. It is possible that there is no card in the reader.
SmartCardMBS.kProtocolUnset = 0
Type | Topic | Plugin | Version |
const | SmartCard | MBS Tools Plugin | 16.3 |
Unset
The items on this page are in the following plugins: MBS Tools Plugin.