Platforms to show: All Mac Windows Linux Cross-Platform
Back to PhidgetTemperatureSensorMBS class.
PhidgetTemperatureSensorMBS.kRTDTypePT1000_3850 = 2
Type | Topic | Plugin | Version |
const | Phidgets | MBS Phidgets Plugin | 22.1 |
Configures the RTD type as a PT1000 with a 3850ppm curve.
PhidgetTemperatureSensorMBS.kRTDTypePT1000_3920 = 4
Type | Topic | Plugin | Version |
const | Phidgets | MBS Phidgets Plugin | 22.1 |
Configures the RTD type as a PT100 with a 3920ppm curve.
PhidgetTemperatureSensorMBS.kRTDTypePT100_3850 = 1
Type | Topic | Plugin | Version |
const | Phidgets | MBS Phidgets Plugin | 22.1 |
Configures the RTD type as a PT100 with a 3850ppm curve.
PhidgetTemperatureSensorMBS.kRTDTypePT100_3920 = 3
Type | Topic | Plugin | Version |
const | Phidgets | MBS Phidgets Plugin | 22.1 |
Configures the RTD type as a PT100 with a 3920ppm curve.
PhidgetTemperatureSensorMBS.kRTDWireSetup2Wire = 1
Type | Topic | Plugin | Version |
const | Phidgets | MBS Phidgets Plugin | 22.1 |
Configures the device to make resistance calculations based on a 2-wire RTD setup.
PhidgetTemperatureSensorMBS.kRTDWireSetup3Wire = 2
Type | Topic | Plugin | Version |
const | Phidgets | MBS Phidgets Plugin | 22.1 |
Configures the device to make resistance calculations based on a 3-wire RTD setup.
PhidgetTemperatureSensorMBS.kRTDWireSetup4Wire = 3
Type | Topic | Plugin | Version |
const | Phidgets | MBS Phidgets Plugin | 22.1 |
Configures the device to make resistance calculations based on a 4-wire RTD setup.
PhidgetTemperatureSensorMBS.kThermoCoupleTypeE = 3
Type | Topic | Plugin | Version |
const | Phidgets | MBS Phidgets Plugin | 22.1 |
Configures the thermocouple input as a E-Type thermocouple.
PhidgetTemperatureSensorMBS.kThermoCoupleTypeJ = 1
Type | Topic | Plugin | Version |
const | Phidgets | MBS Phidgets Plugin | 22.1 |
Configures the thermocouple input as a J-Type thermocouple.
PhidgetTemperatureSensorMBS.kThermoCoupleTypeK = 2
Type | Topic | Plugin | Version |
const | Phidgets | MBS Phidgets Plugin | 22.1 |
Configures the thermocouple input as a K-Type thermocouple.
PhidgetTemperatureSensorMBS.kThermoCoupleTypeT = 4
Type | Topic | Plugin | Version |
const | Phidgets | MBS Phidgets Plugin | 22.1 |
Configures the thermocouple input as a T-Type thermocouple.
The items on this page are in the following plugins: MBS Phidgets Plugin.