DynaPDFMBS.krsNotForPublicRelease = 11

Type	Topic	Plugin	Version
const	DynaPDF	MBS DynaPDF Plugin	8.0

One of the rubber stamp constants for StampAnnotation.

DynaPDFMBS.krsPrint = 4

Type	Topic	Plugin	Version
const	DynaPDF	MBS DynaPDF Plugin	8.0

One of the DynaPDF restriction constants.

DynaPDFMBS.krsPrintHighRes = &h00000800

Type	Topic	Plugin	Version
const	DynaPDF	MBS DynaPDF Plugin	8.0

One of the DynaPDF restriction constants.

This flag is only used for 128 bit encryption. So this flag is ignored if 40 bit encryption is used.

DynaPDFMBS.krsSold = 12

Type	Topic	Plugin	Version
const	DynaPDF	MBS DynaPDF Plugin	8.0

One of the rubber stamp constants for StampAnnotation.

DynaPDFMBS.krsTopSecret = 13

Type	Topic	Plugin	Version
const	DynaPDF	MBS DynaPDF Plugin	8.0

One of the rubber stamp constants for StampAnnotation.

DynaPDFMBS.krsUserDefined = 14

Type	Topic	Plugin	Version
const	DynaPDF	MBS DynaPDF Plugin	8.0

One of the rubber stamp constants for StampAnnotation.

DynaPDFMBS.ksfCanonicalFormat = &h00000200

Type	Topic	Plugin	Version
const	DynaPDF	MBS DynaPDF Plugin	8.0

One of the submit flag constants for CreateSubmitAction.

DynaPDFMBS.ksfEmbedForm = &h00002000

Type	Topic	Plugin	Version
const	DynaPDF	MBS DynaPDF Plugin	8.0

One of the submit flag constants for CreateSubmitAction.

PDF 1.5 embed the entire form into a file stream inside the FDF file -> requires the full version of Adobe's Acrobat.

DynaPDFMBS.ksfExlFKey = &h00000800

Type	Topic	Plugin	Version
const	DynaPDF	MBS DynaPDF Plugin	8.0

One of the submit flag constants for CreateSubmitAction.

DynaPDFMBS.ksfExlNonUserAnnots = &h00000400

Type	Topic	Plugin	Version
const	DynaPDF	MBS DynaPDF Plugin	8.0

One of the submit flag constants for CreateSubmitAction.

DynaPDFMBS.ksfExlude = 1

Type	Topic	Plugin	Version
const	DynaPDF	MBS DynaPDF Plugin	8.0

One of the submit flag constants for CreateSubmitAction.

If set, the fields in a submit form action are excluded if any.

DynaPDFMBS.ksfGetMethod = 8

Type	Topic	Plugin	Version
const	DynaPDF	MBS DynaPDF Plugin	8.0

One of the submit flag constants for CreateSubmitAction.

DynaPDFMBS.ksfHTML = 4

Type	Topic	Plugin	Version
const	DynaPDF	MBS DynaPDF Plugin	8.0

One of the submit flag constants for CreateSubmitAction.

DynaPDFMBS.ksfInclAnnots = &h00000080

Type	Topic	Plugin	Version
const	DynaPDF	MBS DynaPDF Plugin	8.0

One of the submit flag constants for CreateSubmitAction.

DynaPDFMBS.ksfInclAppSaves = 64

Type	Topic	Plugin	Version
const	DynaPDF	MBS DynaPDF Plugin	8.0

One of the submit flag constants for CreateSubmitAction.

Requires the full version of Adobe's Acrobat

DynaPDFMBS.ksfInclNoValFields = 2

Type	Topic	Plugin	Version
const	DynaPDF	MBS DynaPDF Plugin	8.0

One of the submit flag constants for CreateSubmitAction.

DynaPDFMBS.ksfNone = 0

Type	Topic	Plugin	Version
const	DynaPDF	MBS DynaPDF Plugin	8.0

One of the submit flag constants for CreateSubmitAction.

The default export format is FDF

DynaPDFMBS.ksfPDF = &h00000100

Type	Topic	Plugin	Version
const	DynaPDF	MBS DynaPDF Plugin	8.0

One of the submit flag constants for CreateSubmitAction.

Submit the entire PDF file -> requires the full version of Adobe's Acrobat.

DynaPDFMBS.ksfSubmCoords = 16

Type	Topic	Plugin	Version
const	DynaPDF	MBS DynaPDF Plugin	8.0

One of the submit flag constants for CreateSubmitAction.

DynaPDFMBS.ksfXML = 36

Type	Topic	Plugin	Version
const	DynaPDF	MBS DynaPDF Plugin	8.0

One of the submit flag constants for CreateSubmitAction.

DynaPDFMBS.ksmFamilyName = 0

Type	Topic	Plugin	Version
const	DynaPDF	MBS DynaPDF Plugin	8.0

One of the DynaPDF constants for font selection modes.

DynaPDFMBS.ksmFullName = 2

Type	Topic	Plugin	Version
const	DynaPDF	MBS DynaPDF Plugin	11.3

One of the DynaPDF constants for font selection modes.

Full name.

DynaPDFMBS.ksmPostScriptName = 1

Type	Topic	Plugin	Version
const	DynaPDF	MBS DynaPDF Plugin	8.0

One of the DynaPDF constants for font selection modes.

If font selection mode is set to smPostScriptName the font styles fsItalic or fsBold are ignored.
The PostScriptName is already a unique font name incl. style information.

DynaPDFMBS.ksmtAlpha = 0

Type	Topic	Plugin	Version
const	DynaPDF	MBS DynaPDF Plugin	11.3

One of the soft mask constants.

Alpha mode.

DynaPDFMBS.ksmtLuminosity = 1

Type	Topic	Plugin	Version
const	DynaPDF	MBS DynaPDF Plugin	11.3

One of the soft mask constants.

Luminosity mode.

DynaPDFMBS.kspcDefault = 0

Type	Topic	Plugin	Version
const	DynaPDF	MBS DynaPDF Plugin	13.4

One of the constants for ConvertEMFSpool.

Default flags.

DynaPDFMBS.kspcDontAddMargins = 2

Type	Topic	Plugin	Version
const	DynaPDF	MBS DynaPDF Plugin	13.4

One of the constants for ConvertEMFSpool.

If set, the page format is calculated from the EMF files as is. The current page format is not used to calculate margins which are maybe required. Note that the parameters LeftMargin and TopMargin will still be considered.

DynaPDFMBS.kspcFlushPages = 8

Type	Topic	Plugin	Version
const	DynaPDF	MBS DynaPDF Plugin	13.4

One of the constants for ConvertEMFSpool.

If set, the function writes every finish page directly to the output file to reduce the memory usage. This flag is meaningful only if the PDF file is not created in memory. Note also that it is not possible to access already flushed pages again with EditPage().

DynaPDFMBS.kspcIgnorePaperFormat = 1

Type	Topic	Plugin	Version
const	DynaPDF	MBS DynaPDF Plugin	13.4

One of the constants for ConvertEMFSpool.

If set, the current page format is used as is for the entire spool file.

DynaPDFMBS.kspcLoadSpoolFontsOnly = 4

Type	Topic	Plugin	Version
const	DynaPDF	MBS DynaPDF Plugin	13.4

One of the constants for ConvertEMFSpool.

If set, only embedded fonts will be loaded. The EMF files must be converted with the flag mfIgnoreEmbFonts in this case. This flag can be useful if you want to use your own code to convert the EMF files of the spool file.