DirectShowAMCameraControlMBS.kFlagsAuto = 1

Type	Topic	Plugin	Version
const	DirectShow	MBS Win Plugin	12.4

One of te flags for Get/Set.

The setting is controlled automatically.

DirectShowAMCameraControlMBS.kFlagsManual = 2

Type	Topic	Plugin	Version
const	DirectShow	MBS Win Plugin	12.4

One of te flags for Get/Set.

The setting is controlled manually.

DirectShowAMCameraControlMBS.kPropertyExposure = 4

Type	Topic	Plugin	Version
const	DirectShow	MBS Win Plugin	12.4

One of the property selectors.

Identifies the exposure setting, in log base 2 seconds. In other words, for values less than zero, the exposure time is 1/2n seconds, and for values zero or above, the exposure time is 2n seconds. For example:

Value	Seconds
-3	1/8
-2	1/4
-1	1/2
0	1
1	2
2	4

DirectShowAMCameraControlMBS.kPropertyFocus = 6

Type	Topic	Plugin	Version
const	DirectShow	MBS Win Plugin	12.4

One of the property selectors.

Specifies the camera's focus setting, as the distance to the optimally focused target, in millimeters. The range and default value are specific to the device.

DirectShowAMCameraControlMBS.kPropertyIris = 5

Type	Topic	Plugin	Version
const	DirectShow	MBS Win Plugin	12.4

One of the property selectors.

Specifies the camera's iris setting, in units of fstop * 10.

DirectShowAMCameraControlMBS.kPropertyPan = 0

Type	Topic	Plugin	Version
const	DirectShow	MBS Win Plugin	12.4

One of the property selectors.

Identifies the camera's pan setting, in degrees. Values range from –180 to +180, with the default set to zero. Positive values are clockwise from the origin (the camera rotates clockwise when viewed from above), and negative values are counterclockwise from the origin.

DirectShowAMCameraControlMBS.kPropertyRoll = 2

Type	Topic	Plugin	Version
const	DirectShow	MBS Win Plugin	12.4

One of the property selectors.

Identifies the camera's roll setting, in degrees. Values range from –180 to +180, with the default set to zero. Positive values cause a clockwise rotation of the camera along the image-viewing axis, and negative values cause a counterclockwise rotation of the camera.

DirectShowAMCameraControlMBS.kPropertyTilt = 1

Type	Topic	Plugin	Version
const	DirectShow	MBS Win Plugin	12.4

One of the property selectors.

Identifies the camera's tilt setting, in degrees. Values range from –180 to +180, with the default set to zero. Positive values point the imaging plane up, and negative values point the imaging plane down.

DirectShowAMCameraControlMBS.kPropertyZoom = 3

Type	Topic	Plugin	Version
const	DirectShow	MBS Win Plugin	12.4

One of the property selectors.

Identifies the camera's zoom setting, in millimeters. Values range from 10 to 600, and the default is specific to the device.